XSG Revolving Flash Dryer

Detailed Product Description

Characteristics of XSG Revolving Flash Dryer:
Drying sticky materials
The cone structure in the dryer, washing out of the air flow to the wall and the structure of the agitator determines it can deal with certain sticky materials.
Drying thermo-sensitive materials
As the drying time is short, the relative speed between the materials and the hot air is big, and the hottest air does not contact the dried materials directly, it is suitable to treat the thermo-sensitive materials.
The drying intensity is high.
As the materials are smashed, washed out and impacted, its surface area increases and the drying is strengthened; At the same time, as the hottest air does not contact the dried material directly, the entering air temperature can be made higher than the melting point of the materials, therefore, the drying intensity of the equipment is high
Efficiently control the final moisture and fineness
The final moisture and the fineness of the finished product is effectively controlled by the internal devices equipped in the drying tower (swirl-flow flake, elutriate ring or grader) , and the coordination with the temperatures of the entering and discharging air.
Environment meets the standards.
The system eliminates the operation environment pollution under the negative pressure in the operation and it adopts different dust removing mode and materials according to the different raw materials (pulse bag dust catcher, water shower duster, Venturi damp dust remover and so on).
Low labor intensity
The feeder and the discharger are made in different forms according to the difference of the materials so as to reach automatically continuously feeding and discharging aims.
The best power matching
The blower, the draught fan, the agitator and the feeder and so on are furnished with the best power according to the different nature of the materials (density, bulk density, viscosity, fineness, primary moisture, final moisture, angle of repose and so on).

Choices of the system

The moisture and the thermo-sensitivity of the product to be dried will be mainly considered according to the physical nature of the materials to be dried when selecting the drying matching mode, and the basic configuration mode of flash drying is selected and can meet the requirements of the production processes for most products. The matching mode can take the Drawing of system configuration choices as reference.